Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Ferris crews are already moving. Hirex Water Damage sends licensed technicians straight to your Ferris address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in Ferris, TX kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Ferris roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our senior technicians are IICRC-certified and have worked everything from a clean supply-line break to a full sewage backup, so Water Damage Repair in Ferris isn't a side service we tacked on — it's the reason the company exists. Full liability coverage and Ferris, TX licensing back every job we take, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Ferris, TX so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Talk to a Ferris property manager who's lived through an overnight pipe failure and they'll tell you exactly why a crew that arrives already equipped matters — every extra minute is more water in the framing. That's the gap Hirex Water Damage was built to close, one Ferris call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Ferris started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Ferris dispatcher will give you an honest read on urgency, not a sales pitch.
We size the Ferris response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
Truck-mounted extraction equipment on every Ferris rig pulls high volumes of standing water fast, so drying starts the same day instead of the next. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Our drying plans use moisture meters and thermal imaging to target air movers exactly where hidden moisture is trapped, with daily drying logs so you can see the numbers improving, not just take our word for it.
On the residential side in Ferris, we handle the flood-cut, subfloor checks, and content pack-out so your home is ready to rebuild, with clear photo documentation at every stage for your insurance claim.
Multi-unit and commercial Ferris properties get their own project manager plus enough drying equipment to cover the real square footage, not a token setup — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Ferris crews are trained for exactly that protocol.
We apply antimicrobial treatment during every Ferris drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
We quote the job before equipment gets plugged in, so there's no surprise line item buried in the final invoice.
Because our equipment cache sits inside Ferris, TX, most Ferris calls see a technician on-site in under 60 minutes.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
Tell our Ferris dispatcher what's happening — we'll ask a few quick questions to send the right equipment on the first trip.
A licensed technician heads to your Ferris address with extraction and drying equipment already loaded.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Our Ferris technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
That's not a marketing line — it's written into every Ferris work order we issue. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"Water heater blew at midnight and the Hirex Water Damage crew had extraction equipment running before 1am. Genuinely fast." — Danielle R.
"I didn't touch the claim paperwork once. They sent it straight to the adjuster with photos and moisture logs attached." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Most Ferris dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
Yes — every Ferris job gets a written estimate before equipment is turned on, and we walk through it with you line by line.
Our Ferris on-call rotation covers water extraction, drying, and blackwater cleanup any hour of the day or night.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a Ferris job as complete.
Yes, our Ferris crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Ferris tech confirms it's safe.
Commercial response is a regular part of our Ferris work — restaurants, offices, and multi-unit buildings included.
Typical drying time runs 3-5 days for a Ferris home, though a job that sat unaddressed longer can take longer to fully dry.
Mold isn't inevitable, but the window to prevent it is narrow, which is why we treat speed as part of the Ferris service, not an upsell.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
Our Ferris coverage extends through the zip codes shown here and into nearby Ferris, TX communities.
Ferris is our home base, and our reach extends across Ferris, TX through a network of staged equipment and on-call technicians. If your address falls inside or near Ferris, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Ferris, Ferris, TXOne call gets you a Ferris-based team, not a routed national queue.
Call +1-844-833-1325